Single obstruction lights

Obstruction lights, steady burning or flashing, are used to warn air traffic for high structures.

It can be tall buildings, chimneys, masts, cranes, high bridges or similar. There are two major international standards for obstruction lights, ICAO (International Civil Aviation Organization, a UN organization) and the FAA (Federal Aviation Administration, USA). The standards differ slightly, they are normally used as a base for local regulations. Regulations in Sweden are based on ICAO and Swedish Transport Agency’s regulations.

Depending on the height, the object should be marked with low intensity, medium intensity or high intensity light and/or be marked with colour. Both ICAO and FAA give general recommendations, but most countries have adapted local regulations. General recommendations in Sweden are

  • Objects with a height of 45-100 m above the ground surface must be marked with colour marking, with low intensity or with medium intensity obstruction lights
  • Objects with a height of 100-150 m above the ground surface must be marked with low-intensity or medium intensity obstruction lights
  • Objects with a height above 150 m above the ground surface must be marked with low and high intensity obstruction lights in several levels
  •  

    Modern low intensity obstruction lights use LED as a light source. LED has many advantages, lower energy consumption, longer service life and reduced maintenance requirements. One disadvantage is that LED are not visible to pilots using Night Vision Device (NVD). Therefore, Swedish Transport Agency require that in addition to visible light, obstruction lights with LED should also be equipped with IR light (infrared light) that is visible with NVD equipment.

    Avlite offers one of the most flexible low intensity LED obstruction light with IR

  • Long life, >100 000 hours
  • Low power consumption, ca 2W/10VA
  • Selectable between Type A (>10 cd) and Type B (>32 cd)
  • Selectable between 24 hour operation and dusk-to-dawn operation
  • Built-in alarm contact
  • Versions with RS422/485 communication and GSM supervision
  • Installation on pipe (0,75” NPT thread) and versions for floor or wall mount
  • Product specialist
    Micael Hellström